How to used
•
As the unit is powered up, the date and clock are defaulted to Monday, 1
st
Jan
2007, 0:00 or 12:00AM.
•
The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled.
•
The radio is switched off.
•
It then switches to auto-run mode.
Auto-run Mode (Radio OFF)
•
Press <MODE> once to go to different mode sequentially.
•
Auto-run Mode Set the Clock
Set the Date
(with Clock display)
Dimmer ON/OFF Automatic update ON/OFF Set the SDA
•
In radio mode, If RDS information is transmitted by the station, the station name
appears in place of the frequency; the frequency is displayed when there is no
RDS information had been received.
•
Press <Alarm-1> to review/set the alarm-1.
•
Press <Alarm-2> to review/set the alarm-2.
•
Only when the radio is ON, press <M1/M6>, <M2/M7>, <M3/M8> and <M4/M9>,
<M5/10> to recall the preset memories.
•
Only when the radio is ON, press <MEM>,<M1-M10>and then <MEM> again to
store the current station into memory.
•
Only when the radio is ON, press <Vol. +> and <Vol. -> to adjust speaker
volume.
•
When the radio is ON, press <M / SCAN> to preview those preset memory.
Press and hold for 2 seconds to activated the AMS (Automatic Memory Storage).
•
At every minute boundary, the real time clock is compared with the alarm setting
if it has been enabled. For details, please refer to the section of ‘When alarm is
active’.
Set the clock (manually)
•
Press <MODE> once when the unit stays in clock display mode.
•
The clock goes flashing the LCD with day-flag cleared.
•
The second keeps counting up once per second.
•
Press <UP> to advance the clock by 1 minute.
•
Press <DOWN> to move the clock back by 1 minute
•
Press and hold <UP> or <DOWN> to set the clock in fast mode of 10 minutes per
step.
•
Press <MODE> once to set the date.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode.
Set the date
•
Press <MODE> once in clock setting mode.
•
The current date goes flashing in the format of dd.mm.yyyy in the LCD.
•
Press <UP> or <DOWN> to change the current setting by 1 day per step. Press
and hold <UP> or <DOWN> to change the setting in fast mode of 10 days per
step. The day flag will be updated automatically when the date has become
