When alarm is active
•
When the real time clock matches with the alarm which has been enabled, alarm
becomes active.
•
As the alarm becomes active, the Cooking timer, if exists, is terminated
immediately.
•
If Beep sound alarm is selected,
1)
Sound of beep toggles at the Speaker
2)
Muted Radio even radio ON
3)
The duration of alarm is 10 minutes
•
If Radio alarm is selected,
1)
RADIO
ON
2)
the duration of the alarm is 60 minutes
•
To terminate the currently active alarm, press the corresponding key <ALARM1>
or <ALARM2>.
Radio reception
•
Press <POWER> once, the station frequency or the station name show on LCD.
•
If RDS information is transmitted by the station current set, “
”
appears in the display and after short time the station name appears in place of
the frequency.
Recall radio preset memory
•
There are 10 preset memory stations for the radio.
•
When the radio is ON, press <M1/M6> once. ‘MEM’ goes solid; the frequency of
the memory-1 goes solid in the LCD. Press again <M1/M6> to select the preset
memory-6.
•
Similar to <M1/M6>, press <M2/M7>, <M3/M8>, <M4/M9> or <M5/M10> to
select the desired preset memory station.
•
When new preset memory key is pressed, MUTE is active. When keying the
preset memory has been released for 1 second, the selection of preset memory
is considered as valid and the radio will be tuned to that frequency immediately
with MUTE idle.
•
At any time, press other key to start its corresponding function.
Store into memory
•
To store the tuning frequency of radio station being received into any of the
preset memory, press <MEM> once. The ‘MEM’ goes flashing.
•
Select the desired memory station by pressing the corresponding key until its
number goes solid above ‘MEM’.
•
Press <MEM> again to confirm the process of storing. Then, ‘MEM’ goes solid.
•
When ‘MEM’ is flashing, pressing <UP>, <DOWN> or <M/ SCAN> will search up,
search down and memory scan with the ‘MEM’ cleared.
•
Press other key to start its corresponding function.
Search Up/Down
•
When the radio is ON, press <UP> once to change the receiving frequency up by
1 step (50kHz).
•
Press <DOWN> once to change the receiving frequency down by 1 step
(50kHz).
•
Press and hold <UP> to search the next radio station by moving the receiving
frequency up.
