PREFACE
Thank you for choosing a SOUNDLIGHT device.
The SOUNDLIGHT DMX Relay Card 3202R is an intelligent DMX demultiplexer decoding digital data complying with
standards USITT DMX512 and DIN 56930-2. The card drive two contact relay outputs. The card can be used with all
standard light control systems. Its special advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT / ESTA / DIN
-
future-proof
The unit is software controlled an can easily be adapted to any change in protocol definition.
-
integrated hysteresis
Adjustable hysteresis ensures flicker free switching
-
simple supply
The power supply is from standard regulated DC voltage, 12V DC
-
signal loss
In the case of a loss of the drive signal a pre-definable action will be taken.
-
cost-effective
The SOUNDLIGHT 3202R is a cost-effective solution for many purposes.
FEATURES
The relay card 3202R consists of a base printed circuit board and a detacheable DMX start address setting board.
The relay card can be operated with or without start adress board at your option; see below for programming and
address setting options. This card is intended for use in lighting effects and as fast-switching relay card; for limitations
see "Additional Notes" on page 7. The 3202R-EP replaces the 3002R-EP, which is no longer available.
UNPACKING
Please unpack carefully and check that all items are intact. When leaving our factory, the card has been in good
condition. In case of damage during transport please notify the carrier immediately.
When unpacking, you should identify these items:
*
the interface card 3202R complete with address board 3000P
*
this manual
INSTALLATION
Please mount the card in a closed, screened case. The card features fastening holes for tapped screws M3. We
recommend use of brass distance bolts or spacers to mount the card 10mm above the case base plate. Connect
the power supply to PSU leads or the PSU screw terminals.
The power supply connector leads are:
red:
+12V DC stabilized
blue:
0V, GND
Upon application of supply voltage the card is ready for operation.
ATTENTION! Reversing the PSU leads may damage the unit!
Содержание 3202R Mk6
Страница 8: ......
