0RQR,QSXW&KDQQHO
Input Stage
1
The
LINE INPUT is via a standard female XLR-3 connector. It is available
when the LINE switch is depressed.
2
The
MIC INPUT is via a standard female XLR-3 connector. It is available when
the LINE switch is released.
3
REMOTES Socket
This 25-way D-type connector allows you to implement the following facilities:
COUGH/REVERSE TALKBACK Switch
This user-provided facility has two functions, as follows:
1) The Input Channel is muted when all of the following conditions are met: The
Mic input is selected, the Fader is up and the Cough Switch is closed. This allows
the Presenter/Guest to temporarily mute his or her microphone.
2) The Cough Switch allows the Guest to force a PFL so that he or she may talk
to the Presenter. This forced PFL occurs when all of the following conditions are
met: The Mic input is selected, the Fader is down and the Cough Switch is closed
(see the Applications section).
CUE LAMP
This user-provided facility will be controlled via relay contacts which close when
all of the following conditions are met: The Mic input is selected, the Fader is up
and the REM switch is depressed (see the Applications section).
START RELAY
The contacts of this relay will close when all of the following conditions are met:
The Line input is selected, the REM switch is depressed and the Fader is up. The
relay contacts can either close momentarily or they may latch, depending upon
link 6 (see the Applications section).
STOP/RE-CUE RELAY
The contacts of this relay will close momentarily when the following conditions are
met: The Line input is selected and the REM switch is released and/or the Fader is
down (see the Applications section).
TALK-BACK SWITCH
This user-provided switch will, when closed, put the signal from the pre-fade section
of the circuit onto the T/B OUTPUT bus and also to the Continuous Talkback Output
socket of the Monitor section. The major use of this facility is that the T/B OUTPUT
bus feeds the Telco Channels and will allow the Presenter, Guest or Producer to talk
to a telephone Caller off-air (see the Applications section).
SEND/RETURN
This allows for the use of an effects machine to be added to the mono input channel,
e.g. voice processor, echo. The send and return lines are unbalanced and care will
need to be taken with the length and type of leads which are used. This facility is
enabled by the removal of link 5 (see the Applications section).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
24
Mono Input Channel
Содержание MBI 10 Series
