6WHUHR,QSXW&KDQQHO
Input Stage
1
The
LINE 2 (LEFT and RIGHT) female XLR connectors provide for an
alternative or temporary source. The inputs are electronically balanced.
2
The
LINE 1 + REMOTES 25-way D-type female socket provides the
connections for the Line 1 Inputs and also the remote controls for Line 1 and Line
2 inputs. The inputs are electronically balanced.
The remote controls, which are duplicated for both Line 1 and Line 2, are described
below. Only one of the two Start relays (Line 1 Start or Line 2 Start) will be active
at any time, depending upon the setting of the LINE 2 switch. The two Stop/Re-cue
relays are controlled similarly.
Start Relay
The contacts of this relay will close when the STRT switch is depressed and the
Fader is up, or it will close when the PFL switch and the STRT switches are
depressed. The relay contacts can either close momentarily or they may latch,
depending upon link 6 (see the Applications section).
Stop/Re-Cue Relay
The contacts of this relay will close momentarily when the STRT switch is released
or the Fader is down, or, the STRT switch is released or the PFL switch is released
(see the Applications section).
3
The
LINE LEFT and LINE RIGHT COARSE ADJUSTMENT PRESET
POTS allow for the coarse adjustment of the inputs on Line 1 only. The inputs to
Line 2 can be boosted by 10dBv if links 1 and 2 are present on the circuit board (see
the Applications section).
4
The
LINE 2 switch selects, as the input source, Line 2 when depressed and
Line 1 when released. A red LED glows to indicate when Line 2 is selected.
Auxiliary Send
5
The
AUX control routes both the left and right stereo input signals onto the
AUXILIARY MIX bus. The input channel signal may be fed to the Auxiliary
control either pre-fade or post-fade. The factory default is pre-fade but this can be
changed via a link on the pcb (see the Applications section).
Optional Equaliser
6
The
HF EQ control provides high frequency (above 8.5kHz) boost and cut of
+/-10dB. The MF EQ control provides medium frequency boost and cut of +/-10dB
at 3kHz. The LF EQ control provides low frequency (below 180Hz) boost and cut
of +/-10dB.
7
When
the
EQ switch is depressed, the EQ section, described above, is switched
into the signal path. A yellow LED glows to indicate this. When the switch is
released the signal path bypasses the EQ section.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
32
Stereo Input Channel
Содержание MBI 10 Series
