SoundCraft MBI 10 Series, Руководство пользователя

Страница: 47 / 54

MUTE
This red LED glows to indicate that the Studio Monitor output has been muted.
This occurs when any mics connected to Mono Input Channels which are designated
as Distant are being used.
AUTO PFL
When this switch is depressed any PFL selected from any of the channels will be
fed to the Studio Monitor. The PFL signal will replace the existing signal. A red
LED in the switch glows to indicate that this feature is enabled.
When the switch is released PFL signals will not be fed to the Studio Monitor.
LEVEL Control
This controls the level of output fed to the output socket.
Note: When the studio talkback switch is depressed, the signal from the selected
source is replaced by the signal from the inbuilt mic plus the signal from the T/B
Mix bus.
7
STUDIO HEADPHONES
This output is via a 3-pole
1
⁄
4
" ‘A’ gauge jack socket.
The Studio Headphones have 4 sources of input. They are: Desk, Ext, Aux and
PFL. The default source, which is selected at power-on, is Desk, i.e. the program
output.
EXT
This switch selects the external inputs as the source of the Studio Headphones. A
green LED glows to indicate that it has been selected. To de-select this input you
may either press this switch again to return to Desk, or you may press the AUX
switch.
AUX
This switch selects the auxiliary input as the source of the Studio Headphones. A
red LED glows to indicate that it has been selected. To de-select this input you may
either press this switch again to return to Desk, or you may press the EXT switch.
AUTO PFL
When this switch is depressed any PFL selected from any of the channels will be
fed to the Studio Headphones. The PFL signal will replace the existing signal. A
red LED in the switch glows to indicate that this feature is enabled.
When the switch is released PFL signals will not be fed to the Studio Headphones.
LEVEL Control
This controls the level of output fed to the output socket.
Note: When the studio talkback switch is depressed, the signal from the selected
source is replaced by the signal from the inbuilt mic plus the signal from the T/B
Mix bus.
Monitor Section 41