Sound Devices PIX 220 Скачать руководство пользователя

Страница: 9 / 65

PIX 220i, 240i, 220, 240 User Guide and Technical Information

v. 3.01

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Left Panel Descriptions

eSATAp External Drive Connector

Connection for portable, bus-powered
drives. Also compatible with (non-pow-
ered) eSATA to connect to large capacity
drives. Visit

www.sounddevices.com/ap-

proved

for an up-to-date list of tested and

approved storage devices.

Drive Bay

Insert an approved 2.5-in drive mounted
to a PIX-CADDY into the Drive Bay.
When not in use, keep covered with the
supplied rubber grommet. Drives can be
hot-swapped if the drive is not being ac-
cessed for recording or playback.

SATA PIX-CADDY Connector

High-reliability eSATAp connection de-
signed to mate with the PIX-CADDY.

Headphone Output - 3.5 mm

TRS stereo headphone connector. Can
drive headphones from 8 to 100 ohms
to very high headphone levels. Head-
phone volume is controlled by holding

down the AUDIO buton and turning the

Control Knob. Headphone source signal

is changed by holding down the AUDIO

Buton and pressing the Control Knob.

Содержание PIX 220


































































Результаты поиска

Содержание PIX 220

Отзывы:

Похожие инструкции для PIX 220

Бренды по названию

Популярные бренды

Sound Devices PIX 220, Руководство пользователя и техническая информация

Результаты поиска

Содержание PIX 220

Отзывы:

Похожие инструкции для PIX 220

Бренды по названию

Популярные бренды