manualshive.com logo in svg

Sound Devices MixPre-10T, Руководство пользователя

Поделиться
Скачать
Sound Devices MixPre-10T Скачать руководство пользователя страница 44

User Guide

44

Jamming Timecode

In addition to being able to set the generator’s timecode manually, it is possible 

to jam external LTC timecode into the generator when in Free Run mode. 

Jamming enables the MixPre-10T to maintain the same timecode count as 

other devices on set—such as cameras, digi-slates, etc.—without physically 

or wirelessly being linked. The MixPre-10T excels in this scenario, because it 

incorporates an ultra-low drift timecode generator which can maintain timecode 

accuracy over very long periods. 

 

L

The MixPre-10T cannot jam to HDMI TC In.

To jam the MixPre-10T:

1.  Choose whether to use the BNC In or Aux In as your source of external 

timecode.

2.  Connect the external LTC timecode source.
3.  Set Menu>Timecode>TC Mode to Free Run.
4.  Set Menu>Timecode>Frame Rate to the required frame rate.

In normal circumstances, set the internal generator’s frame rate to the 

same as the incoming timecode frame rate. 

 

L

However, it is possible to crossjam, that is have the MixPre-10T jam its internal 

generator to a different but compatible frame rate with the incoming rate. 

Compatible rates are: both integer rates (24, 25, or 30), or both non-integer rates 

(23.98, 29.97nd).

5.  Go to Menu>Timecode>Jam. This will display the Jam screen.

The screen displays the internal and external timecode, and the difference 

(Diff) between the two values.

6.  Tap Source and select BNC In or Aux TC to jam source.
7.  Tap Jam TC to jam timecode. Jamming is successful if Diff = 00:00:00:00.

Содержание MixPre-10T


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды