manualshive.com logo in svg

Sound Devices MixPre-10T, Руководство пользователя

Поделиться
Скачать
Sound Devices MixPre-10T Скачать руководство пользователя страница 32

User Guide

32

Formatting SD Cards & USB Thumbdrives

SD cards must be formatted by the MixPre-10T for reliable recording and 

playback. 
If a USB thumbdrive is inserted into the USB A port, the MixPre-10T 

automatically copies the current project’s recorded files to it. The thumbdrive 

must also be formatted before use. For more information about this Auto Copy 

feature, see 

Copying to a USB Drive

.

 

⚠

Be sure to backup any wanted audio recordings or data before formatting 

since the formatting process erases all data.

We highly recommend using Sound Devices branded SD cards as these have 

been optimized to provide the best performance. If these are not available, 

most reputable manufacturers’ cards (such as SanDisk or Delkin) that meet or 

exceed class 10 speeds are acceptable. Similarly, we highly recommend only 

using Sound Devices’ approved USB thumbdrives to ensure reliable operation.

To format an SD card:

1.  Insert an SD card in the slot located on the rear panel.

2. 

Tap 

.

3.  Tap SD Card > Edit > Format.
4.  When asked to confirm the command to format the card, tap OK.

 

 

Cards with a capacity of 32 GB or less will be formatted with the FAT32 file 

system. Cards with a capacity greater than 32 GB will be formatted with the 

exFAT file system.  

To format a USB Thumbdrive:

1.  Connect a USB ThumbDrive to the USB-A port located on the left panel.

2. 

Tap 

.

3.  Tap USB Drive > Edit > Format.
4.  When asked to confirm the command to format the card, tap OK.

 

All USB drive sizes are formatted as exFAT. 

 

L

The exFAT file system is not compatible with Windows XP or Mac OS X 10.6.4 and 

lower.

Содержание MixPre-10T


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды