Sound Devices MixPre-10T Скачать руководство пользователя страница 18

Страница: 18 / 65

User Guide

Screen

Sub-menu

Description

System

Provides settings for Basic/Advanced/Custom mode, Custom

mode setup, limiters, Date/Time, File Transfer, Bluetooth

Wingman App password, adjusting LCD/LED brightness,

updating firmware, and viewing version and regulatory

information.

Power

Select the type of batteries being used (Alkaline, NiMH,

L-Mount) to ensure that the Power Status icon on the Home

screen accurately displays remaining battery level.

HP Preset

Select LR Stereo, X1X2 Stereo or USB 1,2 or USB 3,4 as

headphone sources.

Channel

Pan

Pan the channel’s signal Left, Center or Right in the stereo LR

mix and Stereo Out.

Channel

Input

Select one of the available Mic, Line, Aux, or USB inputs to

route to the chosen channel.

Channel

Phantom

Turn on 48V phantom power when using a condenser

microphone in the chosen channel.

Channel

Low Cut

Select the frequency at which a low cut filter will be placed.

The filter has a carefully-crafted 18db/octave slope. Low Cut

options are only On/Off in Basic mode.

Advanced Mode

Advanced mode is intended for use by professionals and users who want to

have every available setting and option at their disposal. All settings available

to Basic Mode apply to Advanced Mode in addition to:

Screen

Sub-menu

Description

Outputs

Provides routing, gain and delay settings for the main L/R and

X1/X2 outputs plus output delay settings.

Tone/Slate

Provides additional Tone mode (Continuous and Left Identify)

and Tone Level settings.

Record

Provides additional record settings for gain, sample rate, bit

depth and LR linking.

HP Preset

Provides additional HP presets for LR Mono, User Presets 1-4,

Edit HP Preset utility and HP Solo mode selection. Camera

Stereo and Camera Mono are also available when Aux In Mode

is set to Camera.

System >

Limiters

Lets you turn limiters on or off.

Channel

Solo

Lets you “solo” the selected channel in the headphone output.

Solo mode can be set to Individual or Multiple in the HP Preset

menu. When a channel is soloed, its light ring will flash

orange.

Channel

Arm

Allows pre-fade recording of the channel to an individual track

on the SD card.

Channel

Gain

Sets the sensitivity of the input. Generally, the Gain should be

set so that the loudest parts of the audio signal just touch the

red segments of the meters.

Содержание MixPre-10T


































































Результаты поиска

Содержание MixPre-10T

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices MixPre-10T, Руководство пользователя

Результаты поиска

Содержание MixPre-10T

Отзывы:

Бренды по названию

Популярные бренды