Sound Devices MixPre-10T, Руководство пользователя

Страница: 22 / 65

User Guide
22
CUSTOM MODE -
By setting the Channel Custom Setup to Advanced and the Gain Custom
Setup to Basic, you can use all the Advanced Channel Input features whilst
retaining single gain stage control using the physical channel knobs. This
allows you to use the channel knobs to adjust the level going to the ISO
tracks.
Linking Channels
Are you working with a stereo source—a keyboard or stereo mic perhaps? To
make it easy to adjust these types of sources, the MixPre-10T offers linking of
channel pairs 1-2, 3-4, 5-6, 7-8 either as a stereo pair or mid-side (MS) pair.
Channels 9-10 may also be linked as a stereo pair. For example, the following
procedure links channels 1 and 2.
To link channels 1-2:
1. Push the Channel 1 knob to access that channel’s screen.
2. On page 3, tap Linking.
3. Do one of the following:
X
Select 1-2 for a stereo source.
X
Select 1-2ms for MS source.
You’ll now be able to control the level of both channels 1 and 2 with the
Channel 1 knob. The Channel 2 knob will now function as a balanced control
if stereo linked or as a width control if MS linked.
The MixPre-10T also offers 4-channel linking for channels 1-4 and 5-8.
To link four channels:
1. Ensure System > Mode is set to Advanced, or if using Custom mode, that
Channel is set to Advanced.
2. For channels 1-4, push the Channel 1 knob. For 5-8, push the Channel 5
knob to access the appropriate channel’s screen.
3. On page 3, tap Linking and select either 1-4 or 5-8 respectively.
When four channels are linked, gain, fader, limiters, track arming, low cut
filters, and input delay are all linked and controlled from the single Channel
(1 or 5) screen and knob.