manualshive.com logo in svg

Sound Devices 788T, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices 788T Скачать руководство пользователя страница 135

CL-9 Linear Fader Controller (optional) 

The CL-9 Linear Fader Controller is an optional accessory for the 788T Digital Recorder. It signifi -
cantly expands the mixing capability and accessibility of the recorder. The following is a list of key 
features of the CL-9.

•  100 mm ultra-low latency linear faders on each input for precise control of post-fade levels
•  Master rotary faders for Left, Right, Aux1, and Aux2 Tracks
•  Provides access to the 788T parametric EQ
•  Provides access to continuous pan to the Left and Right Tracks 
•  Provides access to the slating system 
•  Provides access to two separate private bidirectional talk back systems 
•  Allows user to quickly change parameters of various functions 
•  Allows user to quickly change input-to-track routing and track enabled status 
•  Allows user to quickly solo any input, track, or output in the headphone monitor 
•  Ability to quickly mute outputs 
•  No extended power sources required. Control and powering via a single USB cable. 

CL-9 Connection 

The CL-9 is connected to the 788T and powered from it via USB; no other powering source is re-
quired. Connect the 788T’s rear panel KEYBD USB-A  port to the CL-9’s rear panel 788T USB-B port. 
Once connected, the CL-9 immediately updates according to the 788T’s latest version of fi rmware. 

Connect the 788T Headphone Output to the CL-9’s 788T Headphone Input on the rear panel using a 
3.5 mm or 1/4-inch to 1/4-inch TRS cable. This allows the CL-9 to be the master headphone control 
of the entire 788T/CL-9 system. 

The following warning screen appears when the USB connection between a CL-9 and 788T is dis-
rupted. 

Hardw

are Controllers

10

788T/788T-SSD User Guide and Technical Information

127

Содержание 788T





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды