manualshive.com logo in svg

Sound Devices 788T, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices 788T Скачать руководство пользователя страница 12

9. 

INPUTS MUST BE ROUTED TO TRACKS TO RECORD.

From the Input Settings Window, press the PLAY key to enter Input-to-Track 
Routing. An Input can be assigned to any Track. The Rewind and Fast-For-
ward keys route inputs to Track L and R, respectively. Turn the Rotary Switch 
to select a Track from A to X2. Push in on the Rotary Switch to route the input 
to the track. Press PLAY again to return to the Input Settings Window. 

MENU

HDD

MENU

HDD

Press PLAY to enter 
Input-to-Track routing. 
Press again to exit.

Press REW to route to 
Track L, Press FF to 
route to Track R. Use the 
Rotary Switch to route to 
Tracks A - X2.

10. 

Return to the Main Display.

Momentarily move the Input Selector Switch again. 

11. 

Press the MENU key to enter the Setup Menu. 

Various options are confi gured from the Setup Menu, including Sampling 
Rate, Bit Depth, Time Code, etc. Navigate through the Setup Menu by turn-
ing the Rotary Switch.

A
B

MENU

HDD

R

L

MENU

HDD

 

Setup Menu Basics:

Highlighted selection

Selects highlighted option

Navigates through the menu

Exits option and menu

Cancels changes and exits the menu

Turn the Rotary Switch to navigate

through the Setup Menu, push to select an option.

788T/788T-SSD User Guide and Technical Information

4

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Quic

k S
tar
t Guide

Содержание 788T





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды