manualshive.com logo in svg

Sound Devices 788T, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices 788T Скачать руководство пользователя страница 122

Hardware Controllers

CL-1 Keyboard and Remote Control Interface

The CL-1 Keyboard and Remote Control Interface is an available hardware accessory to interface 
with PS/2 compliant computer keyboards and enable external devices to control the 788T. When us-
ing the CL-1, front panel controls and menu selections on the 788T can be mapped to keyboard short-
cuts, allowing for full keyboard control of the recorder. Additionally the CL-1 has contact closures for 
programming remote inputs or outputs. These are commonly used for machine control and “remote 
rolling” using a mixing console with transport controls. 

The 788T C. Link In port is disabled when the Setup Menu Connection Mode is set to Connect to Wave 
Agent. The Sound Devices CL-1 is not functional in this mode. 

Connecting the CL-1 

1.  Connect the included C. Link cable to the 788T’s C. Link Input connector. 

2.  Connect the opposite end of the C. Link cable to the CL-1’s C. Link connector. 

3.  Connect a PS/2 keyboard to the PS/2 connector on the CL-1. 

4.  Connect switches between assigned pins 1-6, pin-7 (ground), and pin-8 (+5V) on the CL-1. 

(

See CL-1 Logic Inputs and Outputs

)

The C. Link port on the 788T provides power for CL-1 operation. 

CL-1 Keyboard Interface

The CL-1 allows a user to use a PS/2 compliant keyboard to control the 788T. All functionality and 
setup of the Keyboard Assignments are identical to that of the USB Keyboard. 

See Keyboard Assign-

ments for more details.

Sound Devices recommends using either a PS/2 keyboard via the CL-1 or a USB Keyboard directly into 
the 788T Keyboard Input, but avoid using both keyboards simultaneously. 

10

788T/788T-SSD User Guide and Technical Information

114

v. 3.01 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Hardw

are Controllers

10

Содержание 788T





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды