Sound Devices 744T страница 79 Скачать руководство пользователя

Страница: 79 / 90

Setup Name

Setup Description

Setup Options

Tone: Frequency

Allows the user to set the frequency of the refer-

ence tone oscillator

100–10,000 Hz in 10 Hz steps

Tone: Mode

Select the destination of the reference tone or to

disables it completely

• disabled

• to record tracks only

• to outputs only

• to record tracks and outputs

Tone: Record Lock

Sets the Tone key to be either available or locked

while in Record Mode.

• Enabled While Recording

• Locked While Recording

Drive: Speed Tests

Performs a write/read speed test on the internal

hard drive, CompactFlash, and external drives.

Data transfer speed is measured in KB/s.

Caution: Drive test will disable processing and mute

outputs for duration of test. Outputs will not return

until test is exited.

INHDD: Space

Shows the drive file system, total size, and space

remaining on the internal hard drive.

INHDD: Erase / Format

Formats the internal hard drive.
Caution, while various PC utilities are able to re-

cover files from a re-formatted drive, once format-

ted old audio data is not accessible by the 744T.

• Empty Trash

• Empty False Takes

• Empty both

INHDD: Empty Trash

Allows user to delete files previously sent to the

trash as well as false takes.

CF: Space

Shows the drive file system, total size, and space

remaining on connected CompactFlash medium.

CF: Erase / Format

Formats installed CompactFlash medium
Caution, while various PC utilities are able to

recover files from re-formatted drives, once format-

ted, old audio data is not accessible by the 744T.

CF: Empty Trash

Allows user to delete files previously sent to the

trash as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

EXHDD: Space

Shows the drive file system, total size, and space

remaining on connected external medium.

EXHDD: Erase / Format

Formats attached FireWire storage volume
Caution, while various PC utilities are able to

recover files from re-formatted drives, once format-

ted, old audio data is not accessible by the 744T.

EXHDD: Empty Trash

Allows user to delete files previously sent to the

trash as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

Balance Cal

Calibrates the center position of the input 2 pot

when used as the balance control for MS recording.

Place balance control to center and press to select.

Power: Ext Low Batt Volt

Sets the warning voltage of the low battery alert

with an external power source. Internal battery

warning threshold is factory set.

10.0–18.0 VDC, 0.1 V steps

Power: Ext Power Function

Controls the behavior of the unit when power is

applied to the external DC jack.

Pin-3 (+) of the external DC input must be wired in

order for the External Power Functions to operate.

• Do Nothing

• Power On Unit

• Power On and Start Record

• Power On/Off unit

• Power On/Off unit and Record

Содержание 744T



























































































Результаты поиска

Содержание 744T

Отзывы:

Похожие инструкции для 744T

Бренды по названию

Популярные бренды

Sound Devices 744T, Руководство пользователя

Результаты поиска

Содержание 744T

Отзывы:

Похожие инструкции для 744T

Бренды по названию

Популярные бренды