Sound Devices 744T страница 58 Скачать руководство пользователя | Manualshive

Страница: 58 / 90

background image

744T User Guide and Technical Information

52

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

The hard drive is mounted to the bottom-side of the recorder’s chassis and is screwdriver accessible.

The drive is “suspended” in the unit with a shock absorbing foam and is attached to the main circuit

board via a “flex board”. Since the unit’s high-density circuitry and tight construction require specific

electronics knowledge, Sound Devices strongly recommends drive replacement be performed by a

qualified technician using proper ESD precautions. Drive replacement done by a qualified technician

has no warranty implications.

744T with bottom panel

removed showing hard

drive mounting location

The internal hard drive is not intended as a swappable exchange medium. The header connector is not
rated for repeated removal and insertion. Only qualified service technician using proper ESD precautions
should perform drive replacement.

Drive Failure

Hard disk drives are mechanical devices and are susceptible to damage from physical shock. One

type of physical shock, called

operating shock

, occurs when the disk is in operation. During opera-

tion, the drive head is typically over the drive platters reading and writing data. When a physical

shock to the drive occurs during operation, the head and the platters can come into contact causing

both components to be damaged. The second type of shock, called

non-operating shock

, occurs

when the head is in the unloaded position, or not positioned over the platters. When a physical

shock occurs in the non-operating state, the head can contact the ramp it is positioned over and dam-

age the ability of the head to read and write data to the hard disk drive. All devices with hard drives

are subject to damage from operating and non-operating shock.

The mechanical construction of the 744T is designed to minimize the transmission of shock to the

hard drive. The drive is isolated from the chassis using special shock-reducing closed-cell foam. This

material increases the amount of shock the hard drive can withstand. Additional protection can be

achieved by operating the unit in a carry case.

If the recorder is used in applications subject to extreme motion, Sound Devices recommends recording to
CompactFlash only. The hard drive will park its write heads to reduce the chance of failure.

With all electrical devices, the higher the ambient temperature the shorter the device’s operational

life. Therefore, take care to observe the specified temperature rating.

There is also a risk from sudden temperature changes, which can create condensation inside the

drive. This condensation can lead to the drive’s read/write heads adhering to the disk surfaces

«
...
56
57
58
59
60
...
»

Содержание 744T



























































































Отзывы:

Нет отзывов

Похожие инструкции для 744T

Бренд: Panasonic Страницы: 180

Бренд: Kane Страницы: 4

Бренд: Han Seung Страницы: 2

Бренд: R&S Страницы: 733

Бренд: R&S Страницы: 369

Бренд: Ulvac Страницы: 18

Бренд: Flytec Страницы: 2

Instrument Control System

Бренд: Opus-Two Страницы: 8

LaserHybrid SB 360i

Бренд: Fronius Страницы: 104

Бренд: E+E Elektronik Страницы: 32

Panametrics Aurora H2O

Бренд: Baker Hughes Страницы: 92

Бренд: phase II Страницы: 11

Бренд: Konica Minolta Страницы: 48

Бренд: CEM Страницы: 2

Бренд: Fiso Страницы: 31

Бренд: General Страницы: 2

efector300 SM0510

Бренд: IFM Electronic Страницы: 45

Бренд: Nieaf Instruments Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды