Sound Devices 744T Скачать руководство пользователя

Страница: 64 / 90

744T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

External DC Input Wiring

Operation

pin-2 to negative (–)

pin-3 to positive (+)

operates the on-board Li-ion charger when the unit is both turned on and off. Use when

plugged into AC power

pin-1 to negative (–)

pin-4 to positive (+)

operates the on-board Li-ion charger only when the unit is turned on—there is no exter-

nal current draw when powered off. Use when connecting to an external battery pack

Regardless of whether pins-1 and -4 or pins-2 and -3 are used, the unit will always charge the Li-ion battery when the unit is

powered on.

Pin-1 and pin-2 of the external DC input are at the same ground potential as chassis and signal ground.

The voltage level of the source powering the unit is displayed on the main LCD screen in the up-
per left-hand corner (

). When the 744T senses a low voltage condition from an external

DC source the power LED and battery voltage display flashes, to alert the user. When the external

DC reaches 9 volts, the 744T will automatically switch over to the removable battery. If no battery is

installed the unit will shut down.

The included AC-to-DC power supply operates the unit and charges the removable batteries simul-

taneously. Pins-3 and -4 are wired to (+) and pins-1 and -2 are wired to (–).

When power is applied, the charging circuit evaluates the battery condition and supplies charg-

ing current, if necessary. When charging, the amber charge LED will flash. Once the battery is fully

charged, the charger will turn off and the amber charge LED will light solid, indicating a full charge.

Large capacity cells increase the charge time.

Charge LED Activity Description of Activity

Off

Charger disabled

Completed charge / battery fully charged

Blinking

Charger enabled / battery is charging

If the charge LED shows anything but a successful charge, the Li-ion battery may require replacement.

Time Code Clock Battery

The 744T has an internal NiMH LR6 (AA) battery to power to the time code generator circuitry and

time-of-day clock. This battery is charged simultaneously with the Li-ion battery. Additionally, the

AA is charged from the Li-ion battery when the unit is powered on.

With a fully charged AA battery, accurate time code is held for two hours after power down. The

744T can be powered down and the removable battery can be removed and replaced without worry

of time code jumps or inaccuracy. When the NiMH battery reaches a factory-set voltage, the time

code generator will shut off and the time-of-day clock will take over — holding time and date for up

to 60 days.

744T maintains accurate time code for 2 hours after power-down with a fully charged NiMH battery time
code AA battery, even with the Li-ion and external DC power sources removed.

Auto Functions with External Powering

The 744T can perform several functions when DC power is applied to and removed from the record-

er. Options available include:

Содержание 744T



























































































Результаты поиска

Содержание 744T

Отзывы:

Похожие инструкции для 744T

Бренды по названию

Популярные бренды

Sound Devices 744T, Руководство пользователя

Результаты поиска

Содержание 744T

Отзывы:

Похожие инструкции для 744T

Бренды по названию

Популярные бренды