Sound Devices 633 Скачать руководство пользователя страница 69

Страница: 69 / 84

Parameter Name

Description

Options

Track Names In Meters

Toggle display and style/position of track names in

meters.

» Off

•  Left
•  Left (w/ramp)
•  Right

Meter Views

Displays a submenu where each of the three available

Meter Views can be selected. (

Off

option is available

for second and third Meter View only)

•  L,R,X1,X2,1-6
•  L,R,1-6
•  L,R,1-3
•  L,R,X1-X4,RTN
•  Off

LED Brightness

Adjust the brightness of all LED’s.

• 5-100%

(5% increment)

» 60%

LCD Brightness

Adjusts the brightness of the LCD backlight.

• 5-100%

(5% increment)

» 100%

LCD Daylight Mode

Toggle daylight visibility mode of user interface. Off

displays a dark user interface suitable for low-light

environments. On displays a bright user interface suit-

able for bright/sunny environments.

» Off

• On

Time Format

Select 12 hour clock or 24 hour clock.

» 12hr

• 24hr

Date Format

Select the format used to indicate the date.

» mm/dd/yy

• dd/mm/yy
• yy/mm/dd

Set Time/Date

Displays a dialog where the 633 time and date can

be set. When highlighter is orange, turn Headphone

Encoder to highlight a field and press Headphone

Encoder to edit. When highlighter is blue, turn

Headphone Encoder to change the value, and press

Headphone Encoder to accept the value.

Time Zone

Set the GMT time zone. (

See “Time Zone and

Daylight Savings”, page 51

)

• (All GMT time zones)

» GMT

Daylight Savings time

Set whether or not daylight savings is in effect.

• On

» Off

Fader/Pan Calibration

Calibrates fader and pan positions. Set all faders and

pans to center position and press OK.

Headphone Encoder Mode

Toggle function of Headphone encoder for selecting

Headphone Sources and adjusting headphone gain.

» Vol/Preset

• Preset/Vol

Headphone Preset List

Choose which headphone presets are visible in the

Headphone Source selection menu. Use the Head-

phone Encoder to toggle Presets. Presets highlighted

in blue will be visible.

USB Port

» Keyboard

• Factory Test

Shortcut Info

Displays a list of all the 633 button shortcut combina-

tion for reference.

Version Info

Displays firmware version information and Serial

Number of the 633.

Update Firmware

Searches connected media for .prg files and prompts

to begin firmware update for each file found.

tup Menu

633 User Guide and Technical Information

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 69 / 84

Результаты поиска

Содержание 633

Отзывы: