Sound Devices 633 Скачать руководство пользователя страница 65

Страница: 65 / 84

Parameter Name

Description

Options

TA3-X1 Out

Select the analog output level of the Aux 1 TA3 output. • Mic

» Line

• -10

TA3-X2 Out

Select the analog output level of the Aux 2 TA3 output. • Mic

» Line

• -10

AES Output Routing

Displays the AES Routing Screen where sources can

be assigned to AES output channels.

Playback to Outputs

Select destination for playback signal.

» All Outputs

• Headphones Only

X1, X2 Routing

Displays the X1,X2 routing Screen where sources can

be assigned to the X1 and X2 output channels.

X3, X4 Routing

Displays the X3,X4 routing Screen where sources can

be assigned to the X3 and X4 output channels.

Output Delays

Displays a sub-menu where outputs L, R, X1, X2, X3,

and X4 can be delayed, independently.

• 0.0 to 10.0 frames

(0.1 frame increment)

» 0.0 frames

Limiters

Parameter Name

Description

Options

Limiter Enable

Globally disable input and output limiters and select

hard or soft knee. (

See “Limiters”, page 19

)

• Off

» Hard Knee

• Soft Knee

Input 1-6 PostFade Thresh-

old

Set the level at which input limiters will begin limiting.

• +4 to +18 dBu

(1 dBu increment)

» 16 dBu

L,R Linking

Links limiters for L and R tracks.

» Off

• On

L,R Threshold

Limiter threshold for Master Bus

• +4 to +18 dBu

(1 dBu increment)

» 16 dBu

X1,X2 Linking

Links limiters for X1 and X2 tracks.

» Off

• On

X1,X2 Threshold

Limiter threshold for Aux Bus

• +4 to +20 dBu (1 dB increment)

» 16 dBu

Recorder

Parameter Name

Description

Options

Record to CF

Sets the type of file and which tracks to record to the

CF card.

• Off

» Wav Poly

•  Wav Poly (ISOs Only)
•  Wav Poly (LR Only)
•  Wav Poly (X1X2 only)
•  MP3 (LR)
•  MP3 (X1X2)
•  Wav Mono
•  Wav Mono (ISOs only)

tup Menu

633 User Guide and Technical Information

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 65 / 84

Результаты поиска

Содержание 633

Отзывы: