Sound Devices 633 Скачать руководство пользователя страница 58

Страница: 58 / 84

Powering

The 633 features a Quad Powering configuration with PowerSafe technology. Any of three power

sources can be attached simultaneously: External DC power, 2 Rear-mounted L-Series batteries,

and internal AA batteries (NiMH or Lithium chemistries preferred) (

See “AA Battery Powering”, page

). When multiple power sources are connected, the 633 will use only one source at a time. The

order of precedence for power sources is:

External DC power. (EX)

2. B1

L-Series battery. (B1)

3. B2

L-Series battery. (B2)

Internal AA batteries. (IN)

PowerSafe circuitry (Shutdown)

When the active power source is removed (or its voltage depleted), the 633 will display a notice on

the LCD indicating which source it is switching to.

To force a complete shutdown of the 633: Slide the Power switch to the Off position then press and

hold the Menu button for 5 seconds. The LCD will briefly flash to indicate that the unit is completely

powered down. This will turn off the timecode backup battery, requiring timecode to be rejammed

and user bits to be reset upon next power up.

External DC Powering

The 633 can be powered from any DC voltage from 10 to 18 VDC. Pin-4 of the locking, Hirose con-

nector is positive (+) and pin-1 is negative (–).

By default, the 633 will switch from external DC powering to the next available power source

when the voltage at the external DC connection drops below the voltage set in Setup Menu option

POWER > Ext DC Ref

. Setting the external DC reference to a value appropriate for the type of battery

being used for external powering will maximize runtime with that battery.

The 633 can be configured to power down (instead of switching power sources) when the external

voltage drops below the external DC reference by setting Setup Menu option

POWER > Ext DC Loss

Shutdown

. This option allows the 633 to be powered up and down by switching the external DC

power source on and off.

L-Mount Battery Powering

Up to two L-Series batteries can be attached to the rear of the 633. Several power capacities are avail-

able in this battery type, ranging from 1000 mAh to 7000 mAh. Larger amp-hour batteries provide

more run-time. The L-Series battery mounts are referred to as B1 and B2. The B1 mount is nearest to

the input panel and the B2 mount is nearest to the output panel.

The 633 uses only one L-Series battery at a time. When both batteries are mounted, B1 will be used

first. When the B1 battery is depleted or removed, the 633 will switch to B2 (if present).

AA Battery Powering

The 633 uses five AA-sized (LR6) batteries. The 633 can use NiMH, 1.5V Lithium, or Alkaline AA bat-

teries. Run time will be very limited when using Alkaline batteries (30 minutes to 1 hour, depending

on settings). NiMH or Lithium batteries are the preferred type because of the approximate 2x to 4x

run time compared to Alkaline batteries.

633 User Guide and Technical Information

v. 1.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

ing

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 58 / 84

Результаты поиска

Содержание 633

Отзывы: