Sound Devices 633 Скачать руководство пользователя страница 59

Страница: 59 / 84

Voltage Metering

The Main Screen displays a DC Voltage Indicator in the form of a battery icon that indicates the

power source currently in use and its level. When the battery icon is filled green, the voltage of the

active power source (internal or external) is full. The background color will change from green, to

yellow, to orange, and to red as voltage depletes.

Good

Warning

Critical

. No other backup power sources avail-

able. Automatic shutdown will occur soon.

The DC Voltage Indicator will only flash red when there are no other connected backup power

sources remaining with adequate voltage. When the DC Voltage Indicator is flashing red, automatic

shutdown will occur soon. During automatic shutdown, the 633 will display a warning, stop any

active recordings, finish writing files, and shut the 633 down. The PowerSafe Battery will power the

633 during this time.

Power Screen

Specific, numeric voltage levels of all connected power sources can be monitored from the Power

Screen. The Power Screen is accessed from the Setup Menu:

POWER

Power source in use

Disconnected power source

Each power source and its voltage level is displayed on the Power Screen. Disconnected power

sources have a black background and no voltage level. The power source currently in use has a thick,

white border.

Voltage Range

The voltage range of the DC Voltage Indicator and the Warning Voltage Threshold can be ad-

justed for external DC power sources. These values are adjusted with the Setup Menu option

POWER > Ext DC Ref

. Adjust the DC Reference to match the type of battery being used to power the

633 externally. The voltage range and Warning Voltage Threshold for each setting are shown in the

following chart.

ing

633 User Guide and Technical Information

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 59 / 84

Результаты поиска

Содержание 633

Отзывы: