Sound Devices 633 Скачать руководство пользователя страница 57

Страница: 57 / 84

Time and Date Settings

Properly setting the time and date is important for file metadata, file system functioning, and some

timecode functions. To set the time and date, access Setup Menu option

SYSTEM > Set Time/Date

Rotate the Headphone Encoder to move the orange highlighter to the desired field. With the desired

field highlighted, press the Headphone Encoder to edit the field, rotate the Headphone Encoder to

change the value, and press the Headphone Encoder again to set the value.

Time Zone and Daylight Savings

Setting the correct GMT time zone and daylight savings values is important for correct data

stamping on the exFAT file system. These settings are configured with Setup Menu options

SYSTEM > Daylight Savings Time

and

SYSTEM > Time Zone.

The following map displays the GMT

time zones.

Time and Date Format

The format of the date (as displayed in BWF metadata and as used in the naming of the Daily folder)

can be in a month/day/year, day/month/year, or year/month/day format. Change this setting

from the Setup Menu option

SYSTEM > Date Format

The format of the time (as displayed in BWF metadata and on the Main Screen) can be set to 12 or 24

hour mode from Setup Menu option

SYSTEM > Time Format

Time and Dat

e Se

ttings

633 User Guide and Technical Information

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 57 / 84

Результаты поиска

Содержание 633

Отзывы: