Page 12
CT12F
960.064 Rev # 0
6.
Proceed to the “Installing the Loudspeaker” section
on these installation instructions for the selected
loudspeaker and bezel combination.
INSTALLING THE LOUDSPEAKER
INSTALLING THE CT12FH/FHT WHEN
USING THE FMB-F BEZEL
1.
Locate the Installation Aid (provided with CT12FH/
FHT) and snap off two opposite tabs. (please see
fig. 22)
2.
Carefully insert the loudspeaker into the installa-
tion aid. (please see fig. 23)
fig. 23
fig. 24
3.
Holding the loudspeaker by the installation aid,
connect the speaker wiring to the correct (+) and
(-) loudspeaker pigtails or desired transformer taps
using a suitable method such as wire nuts, crimps,
or solder/shrink tubing. NOTE: Avoid dripping
solder onto any portion of the loudspeaker.
4.
Examine the loudspeaker mounting system. Verify
that cams are in the closed position (flush to the
speaker). (please see fig. 24) IMPORTANT: Be
sure speaker wires or other objects are not in
contact with the back of the loudspeaker surface to
avoid any noise or damage to the
fig. 25
fig. 22
