Page 3
CT12F
960.064 Rev # 0
11.00 [279]
12.82 [326]
12.82 [326]
10.84 [275]
11.00 [279]
4.00 [102]
FMB-FS - Torsion spring bezel for suspended or
solid ceilings 12.44 in ( 31.6 cm) - square ( this bezel
requires the use of the TBS12S T-Bar Support Bridge).
Weight 0.66 lbs. (0.30 kg.).
MOUNTING HARDWARE ( may be required
by the type of installation being done)
TBS12S - T-Bar Support Bridge Weight 1.1 lbs.
(0.50 kg.) Must be used in horizontal applications,
employing the PBB1.2S backbox, and is recommended
for all installations as a safety measure.
10.66 [271]
10.81 [275]
11.90 [302]
8.94 [227]
12.92 [328]
11.50 [292]
21.90 [556]
23.63 [600]
14.56 [370]
12.33 [313]
11.38 [289]
10.50 [266]
11.90 [302]
9.00 [228]
10.00 [254]
11.90 [302]
8.00 [203]
10.46 [266]
.39 [10]
12.45 [316]
9.04 [230]
9.05 [230]
12.45 [316]
PBB1.2S - Custom size Backbox
Weight 5.20 lbs ( 2.36 kg)
Custom Surface Mount Box Option
The SMBOX12 Surface Mounted Back Box is a
paintable metal enclosure designed for use with either
the CT12FH or CT12FHT models only. Other CT12F
models may not be used with the SMBOX12. Please
note that FMB-F Flush Mount Bezel is required to
complete the assembly for either model. Conduit
knockouts are not supplied in the SMBOX12.The
SMBOX12 may be pre-drilled to accommodate any
standard cabling or conduit hookups.It is recom-
mended that you pre-drill the SMBOX12, prior to any
paint or other finish application.
SMBOX12 Surface Mounted Back Box
Weight 2.9 lbs. (134 kg.)
