mBPs-2ds Front Panel
1.
Power Switch
You can switch on/off the power output.
- ON : One fully charged battery provides power to the device, and the other battery charges.
If the battery which is currently using is almost flat, it automatically switches to the other which has been charged.
If the 2 batteries are flat, so there is lack of power capacity, it provides the power from external input power.
- OFF : It stops providing the power output and charges the batteries in order.
- If you don’t use the product, please place the power switch to ‘OFF’ position.
2.
Output LED
It shows which side of batteries is providing power.
3.
Charge LED
It shows which side of batteries is charging.
4.
Low battery LED
It shows the low battery status. If the light is on here, please connect the wall adopter to charge the batteries automatically.
mBPS-d2s Rear Panel
1.
Power output
It is DC jack for power output, please connect it with tX-USBexp or mBPS-d2s or others.
2.
Power input
It is DC jack for charging batteries, please connect it with the standard wall adopter.
3.
Earth terminal
Connect to the earth(ground).
1
2
3
4
1
2
3
