
GB
Additional Information
A
dditional Informa
tion
Sound drops out.
There is noise.
Some CDs can skip at higher playback volumes. Reduce the volume.
CD is dirty.
Clean the CD.
The CD is scratched.
Replace the CD.
Place the unit in a location free from vibration.
Some CD-R/CD-RW discs may skip at higher playback volume levels, or
generate noise as a result of disc condition or the device used to record it.
Some copy-protected CD may not be playable.
When listening to a CD,
noise is heard from a nearby
TV or radio.
Move the unit away from any nearby TV or radio.
SD/USB
Symptom
Cause and remedy
The SD card or USB device
does not function properly.
If any of the following problems occurs, use a different SD card/USB device.
The file name or folder name (Album name) is not displayed.
The file is not played.
The sound skips.
The sound is static-ridden.
The sound is distorted.
The unit does not recognize the SD card or USB device.
Remove any SD card/USB device, then re-insert it.
Cannot record on a SD
card/USB device.
The SD card is write-protected.
Slide the write-protection switch on the SD card to the cancel position.
(page 7)
There is no spare capacity in the SD card/USB device.
Delete unnecessary audio files/folders.
Use a different SD card/USB device.
Noise/sound skips or sound
is distorted.
Ensure the USB device is connected securely to the unit. To reconnect the USB
device, turn the unit off, disconnect and then reconnect the USB device, then
turn the unit on again.
Check the SD card is inserted securely into the unit. To reinsert the SD card,
turn the unit off, remove and then reinsert the SD card, then turn the unit on
again.
It is possible the noise or distortion was mixed with the file when it was
encoded. In this case, remake the file.
The volume is too high. Adjust the volume.
The ACCESS indicator
blinks after recording has
finished.
Wait until blinking (indicating unwritten data writing) finishes.
The recorded file time is
shorter than expected.
To stop recording, press
(Stop).
(Continued)
Содержание ZS-R100CP
Страница 1: ...ZS R100CP 2011 Sony Corporation Personal Audio System Operating Instructions 4 400 698 12 1 ...
Страница 54: ......
Страница 55: ......
Страница 56: ...Printed in China ...