5
GB
Parts for Installation and
Connections
This parts list does not include all the package
contents.
Installation
Mount the unit on a flat surface.
Mount the unit where
The unit will not interfere with the normal
movements of the driver.
The unit will not be exposed to direct sunlight
or hot air from the heater.
The unit will not come into contact with a
driver/passengers or materials in your car since
the unit becomes hot during use.
Do not install the unit under the floor carpet,
where the heat dissipation from the unit will be
considerably impaired.
Mounting the unit
Prepare a mounting board that is thicker than 20
mm (
13
/
16
in) since the supplied mounting screws
are all 20 mm (
13
/
16
in) long. The unit can also be
mounted on the flat surface of your car without a
mounting board.
1
Insert the supplied mounting brackets
into the slits of the unit and secure them
with the supplied bracket screws
.
2
Place the unit on the mounting board
and mark the two screw hole positions.
3
Drill a 3 mm (
1
/
8
in) pilot hole at each
mark on the mounting board.
Installation and Connections
Main unit
×1
Power connection cable
×1
RCA input cord
×1
High level input cord
×1
Bracket
×2
Bracket screw
ø 2.6 mm × 6 mm
(
1
/
8
in ×
1
/
4
in)
×2
Mounting screw
ø 4 mm × 20 mm
(
3
/
16
in ×
13
/
16
in)
×2
