124
Troubleshooting
A
ppen
dix
When a memory card is inserted
During front panel operations
Alarm message in status
display area
Alarm message in video monitor screen Description/action
Unknown Media(A/B)
UNKNOWN MEDIA(A/B).
PLEASE CHANGE.
The inserted memory card has been partitioned, or it
contains more clips that the maximum that can be
handled by this unit.
Insert a memory card that has not been partitioned,
or one that contains fewer than the maximum number
of clips.
Memory (A/B) needs
Restoring.
MEDIA ERROR.
MEDIA(A/B) NEEDS TO BE RESTORED.
A memory card must be restored because an error
has occurred in the card.
Restore the card or format it.
Unknown FS!(A/B)
CANNOT USE MEDIA(A/B).
UNSUPPORTED FILE SYSTEM.
The inserted memory card is formatted with an
unsupported file system, or it is not formatted.
Format the memory card, or exchange the memory
card for one that is formatted with a file system
supported by this unit.
R/W Limit(A/B)
MEDIA REACHED REWRITE LIMIT.
CHANGE MEDIA(A/B).
The memory card has reached its lifetime rewriting
limit.
As required, copy the clips on the memory card to
internal storage, and then exchange the memory
card.
Note
If you continue to use the memory card, normal
recording and playback may not be possible.
Over DUR!(A/B)
EXCESSIVE DURATION IS IN
MEDIA(A/B) .
A clip with a duration that exceeds 12 hours is
recorded on a memory card.
This memory card cannot be used.
Under Repair of Media
(A/B)
MEDIA (A/B) IS BEING REPAIRED.
Automatic repair for the management area of the
memory card is in progress.
Wait until the automatic repair is complete.
Repair Failed (A/B)
REPAIR FAILED.
The memory card is damaged, and recording and
playback are not possible.
Replace the memory card.
Alarm message in status
display area
Description/action
KEY INHI.!
This appears when the KEY INHI switch is “ON”.
Set the KEY INHI switch to “OFF”.
Not Open Clip!
This appears when a clip operation is attempted with no clip selected.
Select a clip in the clip list screen and try the operation again.
Clip Top!
During playback, this appears if you execute a reverse search when the unit is stopped at the first
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
Clip End!
During playback, this appears if you execute a forward search when the unit is stopped at the last
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
EDL Top!
During EDL playback, this appears if you press the PREV button at the first frame of the first sub
clip of an EDL.
EDL End!
During EDL playback, this appears if you press the NEXT button at the last frame of the last sub
clip of an EDL.
MAX # Clips
No more clips can be recorded because the maximum number of recorded clips has been
reached.
Delete unneeded clips.
Media Full!
Recording or copying is not possible because the internal storage is full.
Delete unneeded clips.
