104
Setup Menu
Chapt
er
7
Men
u
s
710
INTERNAL VIDEO SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator.
When INT SG on page P1 INPUT of the function menu is set to “ON”,
the internal test signal generator operates to output the selected test
signal. This signal can also be recorded.
Off [OFF]:
Do not output test signal.
75% Color Bars [CB75]:
75% color bar signal
100% Color Bars [CB100]:
100% color bar signal
Multi Burst [MLTBS]:
Multi-burst signal
10 steps [10STP]:
10-step signal
Pulse and Bar [PLSBR]:
Pulse and bar signal
Ramp [RAMP]:
Ramp signal
Black [BLACK]:
Black signal
ARIB Color Bars [ARBCB]:
ARIB color bar signal (modify width: 100%)
Note
“ARIB Color Bar” cannot be specified when SD recording is selected. If
“ARIB Color Bar” is selected, the selection is changed to “75% Color
Bars” ([CB75]).
713
VIDEO SETUP REFERENCE
Set the video setup amount to be added to the composite output signal
(in 59.94i/59.94P/29.97P mode only).
Sub-item
OUTPUT LEVEL In 59.94i/59.94P/
29.97P mode
(UC)
Add the setup level selected by this item to the output signal.
0.0
%,
7.5
%
In 59.94i/59.94P/
29.97P mode (J)
Add the setup level selected by this item to the output signal.
0.0
%,
7.5
%
715
VIDEO GAIN CONTROL
a) b)
Adjust the video output level of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–
2048 to 0 to 848
716
CHROMA GAIN CONTROL
a) b)
Adjust the chroma output level of SD video signals output from the SD-
SDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–
2048 to 0 to 848
717
CHROMA PHASE CONTROL
a) b)
Adjust the chroma phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–
128 to 0 to 127
718
SETUP LEVEL (59.94i/59.94P/
29.97P mode)/BLACK LEVEL (50i/
25P mode)
a) b)
Adjust the setup level (black level) of SD video signals output from the
SD-SDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT
connectors.
–
272 to 0 to 272
719
SYSTEM PHASE SYNC
a)
Adjust the sync phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–
128 to 0 to 127
720
SYSTEM PHASE SC
a)
Adjust the subcarrier phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
0 to 511
Menu items in the 700s, relating to video control
Item number
Item name
Settings