10
Front Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
ns
o
f Pa
rt
s
b
Remote control switch
Different positions of the switch allow different operations
as follows.
NET:
Enables access to the network. The indicator lights
when an external network device is being accessed. In
this state, it is not possible to perform recording and
playback on this unit using its buttons/dials.
LOCAL:
Enables operation from the front panel.
With this unit accessing a network device, setting the
remote control switch to “LOCAL” displays a dialog
asking for your confirmation about network
disconnection. To disconnect, press the PUSH SET
knob. To not disconnect, set the remote control switch
to “NET”.
REMOTE:
Enables remote control of this unit from the
following devices:
• Devices connected to the REMOTE(9P) connector
• Devices connected to the SD/HDSDI INPUT
connector with SDI remote control functions
Use setup menu item 214 REMOTE INTERFACE to
select which of the connectors is used for remote
control.
When you are going to remote-control this unit, you
can use setup menu item 006 LOCAL FUNCTION
ENABLE to enable or disable the buttons and switches
in the recording and playback control section of the
unit.
c
KEY INHI switch
This turns key operation inhibit mode on or off.
d
PHONES jack
The jack is a standard stereo jack. Connect stereo
headphones to monitor the audio during recording,
playback, and editing. (Non-audio signals are muted.) The
monitored channel is selected with MONITR L and
MONITR R on the HOME page of the function menu
e
LEVEL (volume) adjustment knob
Adjust the volume of headphones or speakers with the
knob. You can also cause this to simultaneously adjust the
output volume from the AUDIO MONITOR R, L
connectors on the rear panel. To do this, set setup menu
item 114 AUDIO MONITOR OUTPUT LEVEL to “var”.
f
Super Speed USB (
) connector (USB 3.0)
Connect the USB connector of the external storage device.
1
Memory card slots
See “Handling Memory Cards” on page 37 for more
information about memory card operations.
2
Audio level adjustment section
a
CH-1/ALL CH, CH-2 to CH-4 (audio level)
adjustment knobs
Depending on the setting of the VARIABLE switch, these
adjust the input audio or playback audio levels of channels
1 to 4.
You can adjust levels of channels 5 to 8 using the function
menu. For details, see page 35.
By the setting of setup menu item 131 AUDIO VOLUME,
you can enable the CH-1/ALL CH adjustment knob to
simultaneously adjust all eight channels. When this
simultaneous adjustment is enabled, the ALL CH indicator
lights.
b
VARIABLE (audio level adjustment selector)
switch
This selects whether input audio levels or playback audio
levels are adjusted by the CH-1/ALL CH and CH-2 to
CH-4 adjustment knobs for channels 1 to 4, or by the
function menu setting for channels 5 to 8.
REC:
Adjust the input audio levels. The playback audio
levels are fixed at their preset values.
PRESET:
The audio levels are fixed at their preset values.
Eject buttons
SLOT SELECT
button
Memory card slots
MEMORY ACCESS A/B lamps
REC
NET
REMOTE
LOCAL
VARIABLE KEY INHI
PRE-
SET
ON
OFF
PB
CH-1
ALL CH
CH-2
CH-3
CH-4
1
CH-1/ALL CH, CH-2 to CH-4 adjustment knobs
2
VARIABLE switch
