16
Front Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
ns
o
f Pa
rt
s
B
Delete icon:
Flashes while a clip deletion is being
executed.
C
Copy icon:
During a clip copy operation, displays an
icon indicating the copy source/copy destination
media.
D
Network connection display:
“NET-RMT” or “RM-
SDI” is displayed while data is being exchanged with
a network connected external device.
E
Network remote connection display:
Lights during a
network remote control connection to an external
device
.
F
Menu setting status:
Displays the current setup menu
settings.
G
Power source display:
Displays the icon for the
power source being used
When the remaining battery power drops below a
certain level, the icon for battery starts flashing (this is
the battery near end alarm).
With the battery near end alarm displayed, when the
battery voltage drops below the shutdown voltage set
with setup menu item 033 BATTERY END
VOLTAGE, the unit is automatically shut down.
Video monitor screen
A
Superimposed information:
Appears when CHAR
SEL on the HOME page of the function menu is set to
“ON”.
B
Status display area:
Displays messages and icons
about the status of the unit
.
You can disable the status display area with the
DISPLAY button. However, it is automatically
enabled when:
• Display of error/warning/alarm message becomes
necessary.
• During battery-driven operation, the power source
display starts flashing (the battery near end alarm is
given).
Icon
Copy source/copy destination media
SxS memory card/SxS memory card
External storage/SxS memory card
SxS memory card/external storage
Display
Current setup menu settings
BANK1
Same as those in menu bank 1.
BANK2
Same as those in menu bank 2.
BANK3
Same as those in menu bank 3.
DEFAULT
Same as the factory default settings.
Nothing
displayed
Different from any of the above.
Icon
Power source being used
AC power source
Battery
Note
TCR.00:45.39.18*
JOG STILL
REF Not Exist
NETWORK NET-RMT BANK 1
A
Superimposed information
B
Status display area
