Help Guide
http://helpguide.sony.net/tv/eusltn3/v1/en-003/print.html[7/5/2017 12:23:42 PM]
Check that the orientation of each battery matches the positive (+) and negative (-) symbols in the
battery compartment.
Battery power may be low. Remove the remote control cover and replace the batteries with new
ones.
Sliding type
Push-release type
There may be poor contact between the battery and the remote control. Remove the batteries, then
insert them again.
Point the remote control at the remote control sensor located at the front of the TV.
Keep the remote control sensor area clear from obstacles.
Fluorescent light can interfere with remote control operation; try turning off any fluorescent light.
When you unplug the TV and plug it in again, the TV may not be able to turn on for a while, even if
you press the power button on the remote control or the TV. This is because it takes time to initialize
the system. Wait for about 10 to 20 seconds, then try again.
When your voice is not being recognized, make sure to activate the
button on the remote control
with the
button, or register the remote control with the
button to your TV. To confirm these
settings, press the HOME button, then select [Settings] — [Voice Remote Control]. The
button
may not be available depending on your supplied remote control.
[149] Troubleshooting | Remote control/accessories
You cannot turn the Active 3D Glasses on. (3D
models only)
96
