XAV-AX210
8
Sony CONFIDENTIAL
For Authorized Servicer
4. Connect the power cord to the regulated DC power supply, and
turn the power on this unit.
Note 3:
It is not necessary to install the top cover and mechanism deck that
were removed in step 2.
+
–
Regulated DC
power supply
top cover
mechanism deck
5. Press the [OFF] button on the remote commander to the state
of source off, enter the destination setting mode by pressing the
buttons on the remote commander in order of the [4]
t
[5]
t
[9] (press only the [9] button for two seconds).
(Displayed screen in the above
fi
gure are example)
6. The following screen is displayed and the serial number writing
mode becomes effective.
“XXXXXX” is
serial number.
<Set Serial Number SETTING MODE>
X
X X X X X X
(Displayed characters/values in the above
fi
gure are example)
7. Press the [
V
]/[
v
]/[
B
]/[
b
] buttons on the remote commander, in-
put the serial number of memoranda in step 1.
Note 4:
The serial number cannot be inputted by operation of main unit. Be
sure to input the serial number by using the remote commander.
[
b
] press to
advance the digit.
[
B
] press to return
the digit.
[
V
] press to select
the numeric
characters.
[
v
] press to select
the numeric
characters.
Press [ENTER] by the
1st digit to complete
the setting.
Serial number of
memoranda in step 1.
<Set Serial Number SETTING MODE>
7 6 5 4 3 2
1
7 6 5 4 3 2 1
2nd
3rd
4th
5th
6th
7th
7 digits
1st
(Displayed characters/values in the above
fi
gure are example)
8. The setting is completed by press the [ENTER] button on the
remote commander at the state of cursor position of 1st digit,
then the unit reboots and returns to the normal condition.
The state of cursor
position of 1st digit.
<Set Serial Number SETTING MODE>
7 6 5 4 3 2
1
(Displayed screen in the above
fi
gure are example)
9. Press the [HOME] button on the main unit, swipe left the touch
panel, and touch the [Settings] on the touch panel.
Touch the [Settings]
Swipe left
Swipe area
[HOME] button
(Displayed screen in the above
fi
gure are example)
10. The “General Settings” screen is displayed.
Move down the scrollbar on the touch panel to display the [Se-
rial No.], and touch it.
Touch the [Serial No.]
Scrollbar
(Displayed screen in the above
fi
gure are example)
11. Con
fi
rm that the serial number displayed is the same as the serial
number of the model number label.
serial number
7654321
1:00 AM
Serial No.
(Displayed screen in the above
fi
gure are example)
12. Disconnect the power cord from the regulated DC power supply,
and turn the power off this unit.
+
–
Regulated DC
power supply
– Continued on next page –
SYS SET
2018/09/12 22:50:21 (GMT+09:00)
