48
XAV-AX210
Sony CONFIDENTIAL
For Authorized Servicer
SECTION 7
ELECTRICAL PARTS LIST
A-2227-284-A MAIN BOARD, COMPLETE
(Including SXM/MAESTRO board, TUNER board,
Cable, Fan) (See Note 1)
********************
7-621-775-78 SCREW +B 2.6X14
< MOTOR >
FAN1 9-885-220-43 FAN
**************************************************************
SERVO BOARD (Included in DVD deck assy
(DL-C35D2) (Ref. No. DVM1))
************
**************************************************************
SXM/MAESTRO
BOARD
(Included in complete MAIN board)
******************
**************************************************************
A-2227-287-A TFT BOARD, COMPLETE (Including Shield case,
Heat radiation sheet, Light guide, Shield cover)
(See Note 2, 3)
*******************
4-728-478-01 LIGHT
GUIDE
< ROTARY ENCODER >
EN1
9-885-220-53 ROTARY ENCODER (OPTION, VOICE)
**************************************************************
TUNER BOARD (Included in complete MAIN board)
************
**************************************************************
MISCELLANEOUS
**************
BT1
9-885-220-45 BT
ANTENNA
0
DVM1
A-2195-649-A DVD DECK ASSY (DL-C35D2)
(Including SERVO board, Bracket)
F1
9-885-192-49 MINI FUSE (BLADE TYPE) (10 A/32 V)
FFC1
9-885-220-48 FFC (60 PIN)
FFC2
9-885-220-47 FFC (20 PIN)
FFC3
9-885-220-46 FFC (35 PIN)
LCD1
9-885-220-54 TFT (6.4) (Including Shield sheet) (See Note 4)
PW1 1-846-039-12 CONNECTION
CABLE,
AUTOMOBILE
(Power supply connection cable)
TPN1
9-885-214-49 TOUCH PANEL (See Note 5)
USB1
9-885-214-55 USB (CABLE) (
)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• Due to standardization, replacements in
the parts list may be different from the parts
speci
fi
ed in the diagrams or the components
used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “
*
” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when or-
dering these items.
• RESISTORS
All resistors are in ohms.
METAL:
Metal-
fi
lm resistor.
METAL OXIDE: Metal oxide-
fi
lm resistor.
F:
non
fl
ammable
• CAPACITORS
uF:
μ
F
• COILS
uH:
μ
H
• SEMICONDUCTORS
In each case, u:
μ
, for example:
uA.
. :
μ
A. . , uPA. . ,
μ
PA. . ,
uPB.
.
:
μ
PB. . , uPC. . ,
μ
PC. . ,
uPD.
.
:
μ
PD. .
Note 1:
When the complete MAIN board is replaced, be sure to refer the
following, and perform them.
• DESTINATION CHECKING METHOD (page 5)
• DESTINATION SETTING METHOD (page 5)
• SERIAL NUMBER WRITING METHOD (page 7)
• COMMUNICATION CHECK OF Apple CarPlay OR Android
Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 2:
When the complete TFT board is replaced, be sure to refer the
following, and perform them.
• COMMUNICATION CHECK OF Apple CarPlay OR Android
Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 3:
Replaced old complete TFT board is destroyed with the hammer,
and throw out it.
Note 5:
When the touch panel (Ref. No. TPN1) is replaced, refer to
“TOUCH PANEL ADJUST” on page 11.
Note 4:
When the TFT (6.4) (Ref. No. LCD1) is replaced, refer to
“FLICKER ADJUSTMENT” on page 23.
MAIN
SERVO
SXM/MAESTRO
TFT
TUNER
The components identi
fi
ed by mark
0
or dotted line with mark
0
are critical for
safety.
Replace only with part number speci
fi
ed.
Les composants identi
fi
és par une marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spéci
fi
é.
Among mounted electrical parts on each
board, only parts that are described in the
electrical parts list can be replaced for re-
pairing.
The parts that are not described in the elec-
trical parts list cannot be replaced with single
for repairing.
When indicating parts by reference num-
ber, please include the board name.
SYS SET
2018/09/12 22:50:21 (GMT+09:00)