XAV-AX210
26
Sony CONFIDENTIAL
For Authorized Servicer
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
Note:
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
Caution:
Pattern face side:
(SIDE B)
Parts face side:
(SIDE A)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
For Schematic Diagrams.
Note:
• All capacitors are in
μ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and 1/4 W or less unless otherwise
speci
fi
ed.
Note 1:
When the complete MAIN board is replaced, be sure to refer the
following, and perform them.
• DESTINATION CHECKING METHOD (page 5)
• DESTINATION SETTING METHOD (page 5)
• SERIAL NUMBER WRITING METHOD (page 7)
• COMMUNICATION CHECK OF Apple CarPlay OR An-
droid Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 2:
When the complete TFT board is replaced, be sure to refer the
following, and perform them.
• COMMUNICATION CHECK OF Apple CarPlay OR An-
droid Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 3:
Replaced old complete TFT board is destroyed with the ham-
mer, and throw out it.
Note 4:
Among mounted electrical parts on each board, only parts that
are described in the electrical parts list can be replaced for re-
pairing.
The parts that are not described in the electrical parts list cannot
be replaced with single for repairing.
Note 1:
When the complete MAIN board is replaced, be sure to refer the
following, and perform them.
• DESTINATION CHECKING METHOD (page 5)
• DESTINATION SETTING METHOD (page 5)
• SERIAL NUMBER WRITING METHOD (page 7)
• COMMUNICATION CHECK OF Apple CarPlay OR An-
droid Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 2:
When the complete TFT board is replaced, be sure to refer the
following, and perform them.
• COMMUNICATION CHECK OF Apple CarPlay OR An-
droid Auto (page 9)
• FLICKER ADJUSTMENT (page 23)
Note 3:
Replaced old complete TFT board is destroyed with the ham-
mer, and throw out it.
Note 4:
Among mounted electrical parts on each board, only parts that
are described in the electrical parts list can be replaced for re-
pairing.
The parts that are not described in the electrical parts list cannot
be replaced with single for repairing.
• Circuit Boards Location
MAIN board
TUNER board
TFT board
SERVO board
SXM/MAESTRO board
SYS SET
2018/09/12 22:50:21 (GMT+09:00)
