XAV-AX150
13
Sony CONFIDENTIAL
For Authorized Servicer
BLUETOOTH CONNECTION METHOD
Refer to the following procedure when performing a BLUETOOTH
connection with this unit.
Note 1:
This unit can only be connected with one BLUETOOTH device at
a time.
Note 2:
To disconnect the BLUETOOTH connection, turn the connection
off from either this unit or the BLUETOOTH device.
Note 3:
BLUETOOTH pairing is not possible while Apple CarPlay or An-
droid Auto is running.
Connection procedure:
1. Connect the power cord to the regulated DC power supply, and
turn the power on of this unit.
+
–
Regulated DC
power supply
stand, etc.
2. Place the BLUETOOTH device to be connected to this unit
within about 1 m on this unit.
within
about 1 m
stand, etc.
3. Touch the [OK] on the “Initial Setting” screen, the screen chang-
es to the “For your safety” screen and then the home screen is
displayed.
Do not watch and operate the unit while driving.
Follow your local traffic laws and regulations.
For your safety:
1:00 AM
Close
Language
Demo
Set Date
/
Time
English
ON
01/01/2018
Initial Setting
1:00 AM
OK
For your safety screen
Touch the [OK]
Initial Setting screen
(Displayed screen in the above
fi
gure are example)
4. Press the [HOME] button on the main unit, swipe the bottom of
the home screen to the left, and touch the [Settings] on the touch
panel.
AM
Settings
AM
– Lower side of front panel –
Press the [HOME] button
Tuner
Rear Camera
Phone
USB
BT Audio
Swipe area
Swipe left
Touch the [Settings]
HOME screen
(Displayed screen in the above
fi
gure are example)
5. Touch the [Bluetooth] on the “Settings” screen.
Settings screen
General
Sound
Visual
Bluetooth
Settings
1:01 AM
Touch the [Bluetooth]
(Displayed screen in the above
fi
gure are example)
6. Touch the [Bluetooth Connection] on the “Bluetooth” screen.
Bluetooth screen
Bluetooth Connection
Bluetooth Device Info
Bluetooth Reset
Bluetooth
1:01 AM
OFF
Touch the [Bluetooth Connection]
(Displayed screen in the above
fi
gure are example)
7. Touch the [ON] on the “Bluetooth Connection” screen.
(The BLUETOOTH signal turns on and the “BT logo” light up
on the status bar of this unit)
Note 4:
This step is not necessary if [ON] is already selected. Proceed to
step 8.
Bluetooth Connection screen
OFF
ON
Bluetooth Connection
1:01 AM
Pairing
OFF
ON
Bluetooth Connection
1:01 AM
Pairing
Touch the [ON]
“BT logo” light up
(Displayed screen in the above
fi
gure are example)
– Continued on next page –
SYS SET
2020/02/07 23:51:10 (GMT+09:00)