Sony WLL-CA55, Руководство по обслуживанию

Страница: 27 / 174

1-17 (E)
WLL-CA55
PS-678 board
PS-668 board
PSW3 x 6
Transmitter
Cool sheet PS
Unsolder
Hexagonal
supports
Unsolder
PSW3 x 6
Heat sink
9. Remove the five screws and three hexagonal supports,
and remove the PS-668 board and PS-678 board from
the Heat sink.
10. Unsolder the transmitter from the PS-668 board.
11. Remove the cool sheet PS from the transmitter.
Connecting connector
Hold the plug to connect
12. Reassemble the PS-668 board and transmitter in the
reverse order of removal.
m
.
Solder the transmitter close to the PS-668 board.
. When connecting the coaxial cable, hold the plug
and connect the coaxial cable to the connector
vertically.
Press the plug into the connector by small turning to
the left and the right.
.
Check the arrangement of the harness (CAM MIC)
before reattaching the L panel assembly.
(Refer to Section 1-7.)