6
VGF-HS1 3-98-360-11(1)
Error Messages
The following table lists the error messages displayed on the display of your Home Server and the measures
to cope with the problems. Be sure to read or write down the error code and/or the error message before
pressing the OK button.
Error message
Causes/measures
20 DLNA devices already
registered.
Press OK
You cannot connect another DLNA device because 20 DLNA devices
have already been registered. Go to the DLNA device page on the
Home Server Settings Page and delete unnecessary devices.
5 devices already registered.
Press OK
An attempt to register the sixth VGF-WA1 Wireless Digital Audio unit
was made. To register a new unit, go to the DLNA device page on the
Home Server Settings Page and delete the registration of all Wireless
Digital Audio units.
Cannot create Data Sync
receive folder
Press OK
The number of shared folders has already reached the limit. Go to the
Shared folders page on the Home Server Settings Page (page 22) and
delete unnecessary shared folders.
Cooling Fan
failure
The cooling fan on your Home Server is not working. Check the
exhaust air vent on the back (page 12) for any obstacles.
Data Sync device already
registered
Press OK
There already is a Data Sync (transmitting) profile on the destination
device. Use the specified folder on the destination device or delete the
profile to add a new one.
Data Sync setup failed
Press OK
A session to create a new profile for the Remote Home Access
functions failed. Start the session all over again.
Data Sync setup timed out
Press OK
A session to change a Data Sync (transmitting) profile timed out. Start
the session all over again.
Data Sync
Updated
A new file was created or an existing file was updated on your Home
Server by the Data Sync (receiving) function. This message will
automatically disappear in 24 hours.
Defective USB
device connected
A defective USB device is connected. Check the device for
performance.
Device registration failed.
Press OK
Device registration for the Remote Home Access functions failed. Start
the registration all over again.
Error during copying.
Press OK
Data import with the One Touch Copy function failed. Check your
data for corruption.
Troubleshooting