VGP-UPR1 (JP/
GB
/FR/ES/CT/KR) 3-296-348-02(1)
6
GB
2
Insert the supplied installation CD into the CD-ROM drive.
The “AutoPlay” screen will appear.
Tip
If the screen does not appear automatically, right-click “Setup.exe” of the CD-ROM, then click “Run as
administrator.”
3
Click “Run Setup.exe” in the “Install or run program” screen.
If the “User Account Control” screen appears, click “Continue.”
4
Complete the installation by following the instructions on the screen.
Tip
After the installation is complete, a screen that requests to reboot the personal computer may appear. In
this case, select “OK.”
Connecting to the personal computer
Notes
Install the software before connecting the product (page 5).
Be sure to connect the product directly to the USB connector of the personal computer. Do not connect through a USB
hub.
When connecting to a personal computer for the first time, disconnect all devices from this product.
The product does not support Windows Aero. If the product is connected to a personal computer, it will change to the
basic user interface.
Movie playback and software that requires 3D processing are not supported on the display connected to this product.
1
Connect the plug of the supplied AC adapter to the product.
2
Insert the plug of the supplied power cord into the AC adapter.
3
Insert the plug of the supplied power cord into the wall socket.
The DC IN lamp will light up.
4
Connect the product to the USB connector of the personal computer.
A screen that requests to reboot the personal computer may appear. In this case, select “Restart
Now.”
Tip
The screen may dim for a moment after connecting the product to the personal computer. This is a normal
characteristic of setup and is not a malfunction.
You can adjust the length of the product’s USB cable by using the drain at the bottom.
