17
n
N
Setting up the hardware
Network Media Receiver
Setting up the hardware
This section contains information about setting up your Network Media Receiver connections. It is designed to complement the
printed Network Media Receiver
Getting Started
guide.
Setting up the remote control
To set up the remote control, proceed as follows:
1
Open the battery cover on the back of the remote control.
2
Insert two AA batteries (supplied) by matching the + and - on the batteries, with the diagramme inside the battery compartment.
✍
Under normal use, the AA batteries may last up to six months. If your remote control does not operate properly, the batteries may need replacing. If your remote control is
not being used for long periods of time, remove the batteries to avoid possible damage from leaking batteries.
