background image

2

 

GB

WARNING

To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.

Owner’s Record

The model number and the serial number are located
on the bottom of the mouse. Record the serial
number in the space provided below. Refer to this
number whenever you call your Sony dealer
regarding this product.

Model No. PCGA-UVC10
Serial No.

________________________________

For customers in the U.S.A.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
subpart B of Part 15 of the FCC Rules.
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
For questions regarding your product or for the Sony
Service Center nearest you, call 1-888-476-6972 in
the United States or 1-800-961-7669 in Canada.
The number below is for FCC related matters only.

Declaration of Conformity

Trade Name:

SONY

Model No.:

PCGA-UVC10

Responsible Party:

Sony Electronics Inc.

Address:

680 Kinderkamack Road
Oradell,
NJ 07649 USA

Telephone No.:

201-930-6972

The device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus complies with
Canadian ICES-003.

Pour les utilisateurs au Canada

AVERTISSEMENT

Pour prévenir tout risque
d’incendie ou d’électrocution,
gardez cet appareil à l’abri de la
pluie et de l’humidité.

Cet appareil numérique de la classe B est conforme à
la norme
ICES-003 du Canada.

Содержание VAIO PCGA-UVC10

























Отзывы: