Sony SXRD SRX-R105, Руководство по установке

Страница: 28 / 52

28
SRX-series 4K Projector - System Installation Guide
8 How to control the projector
8-1. Overview
There are three types of controls available for the projectors.
1. RS-232C (including the method using the supplied SRX Controller software)
2. Ethernet (including the method using the supplied SRX Controller software)
3. Supplied IR Remote Commander unit
8-2. RS-232C Pin assignment
8-3. Ethernet
Control through a network that uses Ethernet is possible.
Specification of 10Base-T/100Base-TX or an automatic selection is also available.
Connection to the host PC can be made via an Ethernet hub or an Ethernet cross cable.
All the used ports are shown in the list below.
Pin number Signal name Meaning
1 NC
2 RD Received Data
3 TD Transmit Data
4 DTR* Data Terminal Ready
5 GND Ground
6 DSR* Data Set Ready
7 RTS** Request to Send
8 CTS** Clear to send
9 NC
1 2 3 4
6 7 8 9
5
1 2 3 4
6 7 8 9
(D-sub 9-pin, female)
Function Port No. Factory default values
Changes
Used/unused Port No.
SDAP 53862 Automatic start Possible Possible
SDCP 53484 Automatic start Not possible Possible
SMTP 25 Unused Possible Not possible
POP3 110 Unused Possible Not possible
SNMP 161 Unused Possible Not possible
NTP 123 Unused Possible Not possible
HTTP 80 Automatic start Not possible Not possible
* Circuit between pins 4 and 6 is short-circuited in the projector.
** Circuit between pins 7 and 8 is short-circuited in the projector.