Sony SXRD SRX-R105, Руководство по установке

Страница: 25 / 52

25
7
Connecting the Projector
Analog RGB
With the analog component input connector provided on the
optional LKRI-001 board, the projector can be connected to a
computer equipped with an analog RGB output.
Notes
Select “RGB” in “Signal Mode” of “Input Source” in the PICTURE CONTROL
window of the SRX Controller software.
HD-SDI
With the HD-SDI connector provided on the optional LKRI-002
(HD-SDI (4:2:2) or LKRI-003 (HD-SDI (4:4:4)) board, the
projector can be connected to a video device equipped with an
HD-SDI connector - such as an HDCAM™ or HDCAM-SR™.
Notes
When the LKRI-003 is attached to the projector, select the type of signal with
“Signal Mode” of “Input Source” in the PICTURE CONTROL window of the SRX
Controller software. For Single-link input, select “Y/Pb/Pr” or “Y/Pb/Pr FULL.”
For Dual-link input, select “RGB” or “RGB FULL.”
R/G/B/HD/VD
connectors
Monitor cable
(not supplied)
to monitor output
Computer
DVI-D AUX
DVI-D
IN OUT
AUX
VTR
to HD-SDI output
HD-SDI connecting
cable(not supplied)
IN connector