
− 13 (GB) −
GB
Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
WM1
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV and is capable of supporting a
weight of at least six times that of the TV.
•
Refer “Measurement for Wall-Mount
Bracket installation on the wall” on page
19.
•
Refer to your TV’s Reference Guide for the
TV’s weight.
Note
When your TV is installed on the wall, the upper
side of the TV slightly leans forward.
We recommend you to check the position of TV in
the viewing environment.
2
Align
WM1
to the wall and make
four marks.
× 4
WM1
Note
Use a level to check whether
WM1
is level.
3
Drill pilot holes on the marks.
× 4
75 mm
10 mm
Note
Pilot holes must be drilled to a depth of 75 mm,
using a 10 mm diameter drill bit.
4
Содержание SU-WL850
