All other trademarks and registered trademarks are of their respective holders. In this
manual, ™ and ® marks are not specified.
For details of the EULA for network services, please refer to [License agreement] in options
menu on each network service icon.
For details of the GPL, LGPL and other software licenses, please refer to [Software License
Information] in [System Settings] of the [Setup] menu on the product.
This product contains software that is subject to the GNU General Public License (“GPL”) or
GNU Lesser General Public License (“LGPL”). These establish that customers have the
right to acquire, modify, and redistribute the source code of said software in accordance with
the terms of the GPL or the LGPL.
The source code for the software used in this product is subject to the GPL and LGPL, and
is available on the Web. To download, please access the following:
URL: http://oss.sony.net/Products/Linux/
Please note that Sony cannot answer or respond to any inquiries regarding the content of
this source code.
How to connect speaker cables
Be sure to connect the speaker cables correctly to the terminals of the speaker and this
receiver.
Also, be sure to tightly twist the speaker wire strands and insert them securely into the speaker
terminals.
Note
Be sure not remove too much of the speaker cable sleeves, so as to prevent the wires of the speaker
cables from touching each other.
Connect speaker cables properly with the polarities (+/–) matched between the receiver and the
speakers.
Improper connection may result in fatal damage to the receiver.
Strip the jacket to 10 mm (13/32 in) at each end of the speaker cables.
*
