3-6 (E)
SNC-WR632C/WR602C
Yes
No
Yes
Yes
No
Is the VBS signal output from
CN804 on the TM-61 board?
Replace the video connection
cable (BNC).
A
Is there any problem with the
supplied video connection
cable (BNC)?
Is the appropriate TV signal
selected in the camera setting?
(Are the NTSC and PAL output
settings correct?)
Replace the SY-416 board.
(Refer to Section 1-4-6.)
No
Switch the video output system
correctly.
Is there any problem with the
connection between CN704 on
the IF-1232 board and CN105
on the SY-416 board?
Yes
Connect correctly.
Replace the SY-416 board.
(Refer to Section 1-4-6.)
&
For the camera setting, refer to the User’s Guide.
No
Is the video signal input to
pins 5 to 7
of CN105 on the
SY-416 board?
7 pin:
Component Y signal
tri-level sync signal
B
Yes
No
Connect CN103 on the MD-151
board with CN105 on the SY-416
board.
Replace the SY-416 board.
(Refer to Section 1-4-6.)
