manualshive.com logo in svg

Sony SNC-WR602C, Руководство по обслуживанию

Поделиться
Скачать
Sony SNC-WR602C Скачать руководство пользователя страница 47

2-11 (E)

SNC-WR632C/WR602C

6. Click 

the 

[Browse]

 button, select the latest firmware, and then click the 

[Start|Upgrading]

 button.

 

The progress status is displayed in the Progress column. Wait until the upgrade is completed.

7.  After the completion of the upgrade, perform the procedure from step 4 again to perform the firmware 

version upgrade.

 

n

 

This unit has a backup of firmware in the internal memory in preparation for an unexpected error.  
This backup portion is not updated to the latest firmware by performing the version upgrade only 
once. Therefore, be sure to perform the version upgrade twice with the latest firmware.

8.  After the completion of the version upgrade, check that the MAC address, serial number and firm-

ware version displayed in the SNC toolbox are correct.

Progress column

M

M

V

Mac address

Firmware version (Version No.)

Serial number (Serial No.)

Содержание SNC-WR602C



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды