1-7 (E)
SNC-WR632C/WR602C
6. To install, reverse the removal procedure.
n
.
When attaching the sunshade, pass the wire (O) through the portion A in Fig. 1.
.
When attaching the top unit assembly, rotate the cover (TM) as far as it will go in the direction of
the arrow, and adjust the connector on the TM-61 board to the position as shown in Fig. 2.
.
When attaching the top unit assembly, align the portion B of the top unit assembly with the convex
portion of the out cabinet, then securely insert the connector on the TM-61 board into the connector
on the IF-1232 board. (Fig. 3)
.
When attaching the top unit assembly, check that the O-ring (TOP) is securely fitted in the groove
of the out cabinet without being twisted. (Fig. 4)
Back side of top unit
assembly
Top unit assembly
Fig. 2
Fig. 1
Fig. 3
Fig. 4
Connector
Cover (TM)
Connectors
IF-1232 board
TM-61 board
TM-61 board
Convex portion
Portion B
Out cabinet
Sunshade
Wire (O)
Portion A
Out cabinet
Groove
O-ring (TOP)
