130
GUIDE Plus+ system does not appear.
,
1
Even if you complete “Easy Setup,” TV
programme listings do not appear until the
recorder receives the GUIDE Plus+ data.
2
Turn off the recorder, but do not unplug
it.
3
Wait for 24 hours. It may take several
days for the recorder to receive the GUIDE
Plus+ data for all programme positions. If
the recorder does not receive the GUIDE
Plus+ data after 24 hours, set the host
channel manually (page 49).
,
The country/region or postal code is
incorrect. Correctly set your country/region
and postal code (page 23).
,
When the recorder is connected to a set top
box receiver, the set top box receiver must
be turned on to download the GUIDE Plus+
data.
,
Area numbers that cannot be received using
GUIDE Plus+ are set. Select “Easy Setup”
in the “Basic” setup from “Initial Setup” in
the System Menu, and follow the on-screen
instructions to make the settings again
(page 23).
,
The “Time Lock” function on your cable
box is activated. Set this function to off.
,
If the host channel has changed or moved,
the programme guide data cannot be
received. In this case, follow the steps in
“Searching for the GUIDE Plus+ host
channel” (page 48) to update the host
channel setting. If the problem persists after
waiting for one day, search for the host
channel at the following website and set the
host channel manually (page 49).
www.europe.guideplus.com
The programme position number in the
programme listing does not match the
broadcast station.
,
There may be more than one channel lineup
for your area. To change the channel lineup,
select “Editor” in the Menu Bar of the
GUIDE Plus+ system (page 49).
Programme listings for some programme
positions are missing.
,
The programme guide data may not be
updated. Turn off the recorder and let the
recorder receive the programme guide data.
,
Some broadcast stations support only two
days of data. For details, see the following
website:
www.europe.guideplus.com
,
All of the GUIDE Plus+ data could not be
received because the reception is poor.
The programme listing is not up to date.
,
The recorder was in use during the time that
the GUIDE Plus+ data was scheduled to be
downloaded.
,
All of the GUIDE Plus+ data could not be
received because the reception is poor.
There is no sound.
,
Re-connect all connections securely.
,
The connecting cord is damaged.
,
The input source setting on the audio
component or the connection to the audio
component is incorrect.
,
The recorder is in reverse play, fast-
forward, slow motion, or pause mode.
,
If the audio signal does not come through
the DIGITAL OUT (COAXIAL)/HDMI
OUT jacks, check the “Audio Out” setup
(page 116).
,
The recorder supports only MP3 audio,
Dolby Digital and MPEG audio for DivX
video files. Press AUDIO and select MP3
audio or MPEG audio.
No sound is output from the HDMI OUT
jack.
,
Try the following:
1
Turn the recorder off
and on again.
2
Turn the connected
equipment off and on again.
3
Disconnect
and then connect the HDMI cord again.
,
The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
,
The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format. In this case, set “Audio
Output” to “PCM” in the “HDMI Output”
setup (page 125).
GUIDE Plus+ system (in the UK
only)
Sound
