102
Program listings for some channels are
missing.
,
It may take several days for the recorder to
receive all of the TV Guide On Screen data.
,
Some channels, such as satellite channels, are not
displayed by the TV Guide On Screen system.
,
All of the TV Guide On Screen data could not be
received because the reception is poor.
The program listing is not up to date.
,
The recorder was in use during the time that the
TV Guide On Screen data was scheduled to be
downloaded.
,
All of the TV Guide On Screen data could not be
received because the reception is poor.
There is no sound.
,
Re-connect all connections securely.
,
The connecting cord is damaged.
,
The input source setting on the amplifier or the
connection to the amplifier is incorrect.
,
The recorder is in reverse play, fast-forward,
slow motion, or pause mode.
,
If the audio signal does not come through the
DIGITAL OUT (OPTICAL or COAXIAL)/
HDMI OUT jacks, check the “Audio
Connection” settings in “Audio” setup (page 94).
No sound is output from the HDMI OUT jack.
,
Try the following:
1
Turn the recorder off and
on again.
2
Turn the connected equipment off
and on again.
3
Disconnect and then connect the
HDMI cord again.
,
The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio signals).
,
The equipment connected to the HDMI OUT
jack does not conform to the audio signal format,
in this case set “Audio(HDMI)” of “Audio
Connection” in “Audio” setup to “PCM”
(page 95).
Sound distortion occurs.
,
Set “Audio ATT” in “Audio” setup to “On”
(page 93).
Sound is noisy.
,
When playing a CD with DTS sound tracks,
noise will come from the LINE OUT 1/2 R-
AUDIO-L jacks (page 63).
The sound volume is low.
,
The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in “Audio” setup to “TV Mode”
(page 94).
,
Set “Audio ATT” in “Audio” setup to “Off”
(page 93).
,
One of the TVS effects is selected (page 61).
An alternate audio track cannot be recorded or
played.
,
Second Audio Program (SAP) is not available
for all programs. The program you are recording
does not have a second audio program.
,
You have set “Tuner Audio” in “Options”
settings to “Main” (page 98). Select “SAP” to
record alternate audio programs.
,
If you have connected an AV amplifier to the
DIGITAL OUT (OPTICAL or COAXIAL) jack
and want to change the audio track for a DVD-
RW (VR mode) during playback, set “Dolby
Digital” of “Audio Connection” in “Audio”
setup to “D-PCM” (page 94).
The recorder does not play any type of disc
(except HDD).
,
The disc is upside down. Insert the disc with the
labeled side facing up.
,
The disc is not correctly inserted.
,
Moisture has condensed inside the recorder.
Remove the disc and leave the recorder turned on
for about half an hour until the moisture
evaporates.
,
If the disc was recorded on another recorder, the
recorder cannot play the disc if it was not
finalized (page 40).
The recorder does not start playback from the
beginning.
,
Resume play was activated (page 62).
,
You have inserted a DVD whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
The recorder starts playing automatically.
,
The DVD VIDEO features an auto playback
function.
Sound
Playback
